Usb Podaczenie Stykow W Kablu Tomtom
1 USER MANUAL On-Line UPS PowerWalker VFI 6000P/RT LCD PowerWalker VFI 10000P/RT LCD EN, PL, DE Uninterruptible Power Supply System2 Contents 1. 30 Figure 4-5.a: Parallel systerm wiring diagram of 6K/10K 2731 Figure 4-5.b: Parallel System Installation Diagram 6) Turn on the input breakers for the two parallel UPS.
USB ports first go through a USB controller then to the motherboard so it does not matter which one you use. You must check to see if you TomTom is charging off the USB connection, then probably your USB connection is correct and it may be the faulty tomtom software. Jun 27, 2010 Sekarang kan lagi marak banget kan film 3D di bioskop. Mungkin disekitar kita ga ada bioskop/ bioskopnya ga ada 3D/ ga punya duit buat nonton. Solusinya kan download film bersangkutan yang versi 3D. Nah timbul masalahnya. Windows 10 notifications not showing up. Di deket rumah saya sih ga ada yang jualan kacamata 3D jadi gimana cara mendapatkannya? Buy TomTom USB, adapter Cables with 5 pin micro male USB, easy charging & mini USB cable. For customers with special needs, we have provided a customer support phone number reachable 24 hours a day, 7 days a week, 365 days a year: (800) 720-6364. FAQ My Order Status Log In / Register My Account.
2832 7) Pressing button continuously for more than 1 second for one UPS of the system, then the system will start to turn on and enter line mode. 8) Regulate the output voltage of the each UPS separately, and check if the output voltage difference between the two ups is less than 0.5V. If the difference is more than 0.5V, the UPS need to be regulated.
9) If the difference output voltage is less than 0.5V, switch on the output breakers for the two UPS separately and switch on the main O/P breakers, then the system will work normally in parallel. The output wiring requirement as follows: When the distance between the UPS in parallel and the breaker panel is less than 10 meters, the length difference between input and output cable of the UPSs is required to be less than 20%.
When the distance between the UPS in parallel and the breaker panel is more than 20 meters, the length difference between input and output cable of the UPSs is required to be less than 5%. How to join a new UPS to a parallel system: 1) Firstly a main maintenance mechanical switch or static switch should be installed for the parallel system. 2) Regulate the output voltage of the new UPS: check if the output voltage difference between the new UPS and the parallel system is less than 0.5V.
Usb Podaczenie Stykow W Kubla Tomtom Download
3) Ensure the bypass of the parallel system is normal and the bypass setting is enable, then press the button to turn off the UPS, then UPS will work in bypass mode. 4) Set the main maintenance switch or static switch from UPS to BPS, then switch off the main output breaker and the input breaker and mains breaker, then the UPS will shut down. 2933 5) Connect the cable and wire of the added UPS according to the Figure.4-5.a and Figure.4-5.b 6) Switch on the input breakers and mains breaker, and make sure that every UPS work in bypass mode. 7) Switch on the O/P breakers and main O/P breaker,transfer the main maintenance switch or static switch from BPS to UPS. 8) Press the button of one UPS, each UPS would start to turn on, after that, the two UPS should work parallel in Line mode.
How to remove a single UPS from a parallel system: 1) Firstly a main maintenance mechanical switch or static switch should be installed for the parallel system. 2) Ensure the bypass is normal and the bypass setting is enable, press the button to turn off the UPS system, and the UPS system will work in bypass mode. 3) Transfer the main maintenance switch or static switch from UPS to BPS, then switch off the output breakers and the input breakers and mains breaker for the two UPS, and the UPS would shut down. 4) Switch off the main O/P breaker and O/P breaker for the UPS system. 5) Remove the wanted UPS and cables and wires. 6) Switch on the mains breaker and input breaker of the reserved UPS, make sure the UPS work in bypass mode.
7) Switch on the O/P breaker and main O/P breaker. 8) Transfer the main maintenance switch or static switch from BPS to UPS, and press the button to turn on the UPS, and the UPS would start to turn on, then the UPS should work in Line mode. Operation 5.1 Display Panel The UPS has a four-button graphical LCD with dual color backlight. Standard back-light is used to light up the display with white text and a blue background. When the UPS has a critical alarm, the backlight changes the text to dark amber and the background to red.